One of the major vehicles that drive the economy of any nation is the manufacturing industry. Countries that are considered to be industrialized, advanced and economically buoyant are countries with a vibrant and active manufacturing sector. The manufacturing industry is indeed wide and all-encompassing because manufacturing is all about producing goods, equipment, chemicals, machines, et al.
As a matter of fact, almost all industries in the world rely on the manufacturing industry to effectively function. For example, the medical and health industry depend on the manufacturing industry for most of the equipment, tools, and supplies that they need to function. Also, the agriculture industry depends on the manufacturing industry for the machinery, chemicals, and tools they make use of.
So, if you are considering going into the manufacturing industry in Canada, you won’t get it wrong because available data shows that ease of Doing Business in Canada averaged 14.67 from 2008 until 2016, reaching an all-time high of 22.00 in 2016 and a record low of 8.00 in 2009. This goes to show that manufacturers are doing pretty great in Canada. Now let us quickly go through the 50 best manufacturing business opportunities that exist in Canada.
What Manufacturing Business Opportunities Exist in Canada?
Table of Content
- Adhesive Manufacturing
- Apparel Manufacturing
- Manufacturing of Children’s Toys
- Cigarette and Tobacco Production
- The Brand-Name Pharmaceutical Manufacturing
- Manufacturing of Chemical Products
- Manufacturing of Cosmetic and Beauty Products
- Manufacturing of Fertilizer
- Manufacturing of Audio and Video Equipment
- Manufacturing of Communication Equipment
- Manufacturing of Papers and Notebooks
- Electric Bulb and Fittings Production
- Kitchen Utensils Manufacturing
- Rugs and Rubber Carpet Manufacturing
- Manufacturing of Plastic Bottles
- Battery Manufacturing
- Chemical Production
- Nails, Nuts and Bolts Manufacturing
- Tires Manufacturing
- Hand Tools Manufacturing
- Mobile Phone Accessories Manufacturing
- Automobile Spare Parts Manufacturing
- Boiler & Heat Exchanger Manufacturing
- Electrical Equipment Manufacturing
- Baking Mix and Prepared Food Manufacturing
- Touch Light Manufacturing
- Umbrella, Raincoats and Rain boot Manufacturing
- Footwear and Belt Manufacturing
- Manufacturing of Metal Cans and Container
- Wire and Cable Manufacturing
- Electronic Component Manufacturing
- Manufacturing of Wristwatches and Wall Clocks
- Soap Manufacturing
- Picture Frame Manufacturing
- Eye Glasses and Frames Manufacturing
- Mattress and Pillow Manufacturing
- Safety Gadgets Production
- Ceramic Wares Production
- Diapers and Baby Wipes Production
- Doors Manufacturing
- Aluminum Products Manufacturing
- Furniture Manufacturing
- Textile Production
- Paint Manufacturing
- Jewelry Production
- Air Freshener Production
- Pesticide Manufacturing
- Manufacturing of Buttons for Clothes
- Manufacturing of Blinds and Shades
The Adhesive Manufacturing industry manufactures adhesives, glues and caulking compounds, rubber cement, epoxy and mucilage adhesives, pipe-sealing compounds and plumbers’ putty, dextrin and starch glues, adhesives, except asphalt, dental and gypsum base.
Adhesives are materials that are initially fluid or semifluid, but solidify when placed between two opposing solid materials. They bond to the surfaces to which they are applied and prevent joint movement. The Canadian Adhesive Manufacturing industry is characterized by growth in response to improved demand from key downstream markets and improved market conditions.
Meanwhile, consumer spending in Canada is also forecast to improve, leading to growth in demand for adhesives from the packaging sector. Adhesives will continue to grow in importance in industrial markets that rely on durable and lightweight inputs such as aircraft manufacturing and automobile manufacturing.
The Apparel Manufacturing industry in Canada manufactures apparel from purchased fabrics. The industry engages in the manufacturing of underwear and nightwear, suits, coats and overcoats, shirts and sweaters, pants, trousers, slacks and jeans, snow apparel, swim apparel, athletic apparel et al.
The Apparel Manufacturing industry in Canada has been characterized by offshoring, import competition and a significant shift toward the production of high-end products. This industry has a bright future and as a matter of fact, the anticipated appreciation of the dollar is expected to drive down industry product sales abroad, as these goods will become less affordable for foreign consumers.
Manufacturing of Children’s Toys
Children all over the world can easily relate with toys no matter the language they speak or the color of their skins. This goes to show that there is a very large market for children’s toys. So if you are considering starting a business in the manufacturing sector in Canada, you can consider going into the manufacturing of children’s toys. Just like any other business, if you are able to break into the market you will sure make huge profits from this business.
Cigarette and Tobacco Production
Operators within this industry stem and redry tobacco, manufacture cigarettes, cigars, smoking and chewing tobacco and reconstituted tobacco. Industry operators acquire raw materials from tobacco growers, and paper and fiber manufacturers.
They then process these materials into tobacco products that are sold to wholesalers and retailers. Interestingly, the Cigarette and Tobacco Manufacturing industry in Canada has flourished despite having to contend with tough regulatory pressures, taxation and declining cigarette consumption.
The introduction of innovative smoking products has fueled much of the industry’s revenue growth. These products are perceived as less harmful than cigarettes, which has caused consumption to grow and become an attractive alternative to cigarette manufacturing.
The Brand-Name Pharmaceutical Manufacturing
The Brand-Name Pharmaceutical Manufacturing industry in Canada develops prescription and over-the-counter products used to treat illnesses in humans and animals. Players in this industry engage in the manufacturing of brand-name drugs that have patent protection.
The Brand-Name Pharmaceutical Manufacturing industry in Canada has endured strong competitive pressures from generic drugs by innovating its product line and attracting higher demand from Canadians.
In response to many brand-name drugs losing their patent protection, many operators have streamlined their operations. By forming networks with public or private companies and academic institutions, industry operators have been able to share research and development costs.
Manufacturing of Chemical Products
Chemical product manufacturing businesses manufacture a diverse range of chemical products. Key product groups include custom compounding plastic resins and manufacturing toners, toner cartridges, photographic chemicals and sensitized photographic film, paper and plates.
Custom compounding of plastic resins includes custom mixing and blending of purchased plastic resins and reformulating plastic resins from recycled plastic products. This indeed a thriving line of business and the industry will likely benefit from improved demand from the construction and manufacturing markets, which themselves should be buoyed to some extent by stable oil prices.
Manufacturing of Cosmetic and Beauty Products
The Cosmetic and Beauty Product Manufacturing industry in Canada prepares, blends, compounds and packages beauty products and cosmetics. Products included in this industry are perfumes and colognes, makeup items, hair preparations, face creams, lotions and other toiletries.
The Cosmetic and Beauty Product Manufacturing industry in Canada has experienced growth over much of the five years to 2021 by manufacturing widely accepted and necessary personal care products, such as shampoo and lotions. Revenue growth is determined by demand from wholesalers and retailers, which is ultimately driven by consumer spending, tastes and preferences.
Manufacturing of Fertilizer
Organic and non-organic fertilizers are needed in the agriculture sector; there is a large market for this type of business. The Fertilizer Manufacturing industry in Canada primarily manufactures fertilizer products. These products contain a different mixture of the three vital nutrients essential for plant growth which include nitrogen, phosphorous and potassium.
The products are distributed via wholesale arrangements with third parties or, in the case of vertically integrated operations, by the manufacturer. Fertilizer is used in crops that produce food, animal feed, fiber and energy, and is the main product produced by the industry. Fertilizer is a globally traded commodity and the prices of industry goods are closely linked with global supply and demand conditions.
Manufacturing of Audio and Video Equipment
The Audio and Video Equipment Manufacturing industry in Canada comprises manufacturers of electronic audio and video equipment for home entertainment systems, vehicles and public areas. Globally, industry operators have offshored their manufacturing operations to low-cost countries.
Domestically, they have retained their high value-added processes, which require research and development (R&D) expenditures. The industry has experienced high revenue volatility, with both strong growth and steep declines over the five years to 2021.
Manufacturing of Communication Equipment
Operators in this industry primarily manufacture radio and TV broadcasting equipment, as well as other wireless communications equipment, such as antennas, set top boxes, GPS systems, cell phones, satellite uplink technologies and broadcasting equipment.
A drastically reduced Canadian dollar, combined with high import penetration and the release of the popular Apple iPhone, a strong competitor to the industry’s products, prevented the industry from experiencing revenue growth. Nevertheless, with the opening of markets in developing countries, this industry will experience growth.
Manufacturing of Papers and Notebooks
Although the campaign for preserving trees and our ecosystem is gaining prominence and people are encouraged to reduce the number of papers they use especially if they have options, but the fact remains that there is a very large market for the paper industry; the market cut across all sectors because people need papers in schools, offices and everywhere business is conducted.
So, if you live in a province in Canada where you can easily get permits to fell trees, then you should consider starting paper and notebook manufacturing business. It is indeed a profitable business.
Electric Bulb and Fittings Production
Electric bulbs and fittings are found in buildings except where civilization and electricity has not gotten. This goes to show that there is a global market for electric bulbs and electrical fittings. So, if you are considering starting a business in the manufacturing industry in Canada; a business whose products can easily attract buyers, then you should consider going into the production of electric bulbs and fittings.
Although the market for electric bulbs and electrical fittings is competitive, but if you are creative with your production, you are likely not going to struggle to get your own market share.
Kitchen Utensils Manufacturing
Pots, kettles, fry pans, cutleries and other kitchen utensils are essentials in our homes, canteens, restaurants, and hotels et al. Food is the number one need of humans and almost in all cases, kitchen utensils are used either in the process of preparing foods or during eating.
This goes to show that there is a large market for kitchen utensils. As a matter of fact, there is hardly any household where you aren’t going to find kitchen utensils. So, if you are considering starting a business in the manufacturing industry in Canada, going into the manufacturing of kitchen utensils won’t be a bad idea.
- Computer Peripheral Manufacturing
Another business that you should consider starting if you are interested in the manufacturing industry is computer peripheral manufacturing. This industry includes companies that manufacture peripheral equipment for computers, such as monitors, keyboards, mice, printers, scanners and terminals, computer storage devices and attachments and data processing machines and accessories. This industry is indeed promising and the reason is not far – fetched.
Continued increase in consumer spending are expected to help boost demand for high-margin hard disk drives, but this will be offset by the continual declines in personal desktop computer purchases. This is expected to reduce the number of mice, keyboards and webcams produced, as these products are often integrated into laptops, which are becoming more popular.
Rugs and Rubber Carpet Manufacturing
The market for rugs and rubber carpets is indeed a large one, if you open a production factory for this type of business, you are sure going to breakeven within a short period of time especially if you have good marketing and promotion strategies. Just ensure that conduct a thorough market survey and feasibility studies and you want struggle to manage your rugs and rubber carpets manufacturing business in Canada.
Manufacturing of Plastic Bottles
The food and drink industry as well as the chemical industry requires plastic bottles to package some of their products. Liquid is sold to the public only when it is properly packaged except on few instances. If you are able to locate food and drink processing companies in your area and also chemical manufacturing factories, it means that there is a market for plastic bottles. It is a business that you should consider going into in Canada.
This industry manufactures two types of batteries – primary and secondary batteries. Secondary batteries are also known as rechargeable or storage batteries. Primary batteries have only one life and are not rechargeable. Industry products have a variety of uses, including in cell phones, medical equipment, households and the automotive and transport sectors.
Although demand from transportation equipment manufacturing will continue to spur demand for batteries, growth from transportation equipment manufacturing is expected to slow and will likely continue to be served by inexpensive imports.
The industry experienced high revenue volatility over the five years to 2020 due to its large dependence on exports and the vast proliferation of imports. As a small industry, booms and busts in revenue are dramatic, with a 15.8% surge in revenue over 2015 to begin the current period.
Another manufacturing business that is highly thriving in Canada that you should consider starting is chemical production. There are different chemicals that are used for different purposes. All you need to do if you want to go into this type of business is to choose the type of chemicals you want to be specialized in. It could be cleaning, food preservation chemicals or any other chemical as long as you have a market for it.
Nails, Nuts and Bolts Manufacturing
Nails, nuts and bolts are used in the construction industry, carpentry and of course in the engineering industry. If you have the technical skills or the required startup capital, you can start this type of business on a small scale and supply the cottage industry within your location and at the same time you can start this type of business on a large scale i.e. mass – producing nails, nuts and bolts. Operating a large scale nails, nuts and bolts manufacturing business will give you the privilege of exploring international markets.
Tires are used by airplanes, trucks, cars, bikes, bicycles, forklifts et al. It goes to show that there is a large market for tires. It is fact that there is hardly any city in the world where you won’t find automobile which is why the sale of tires is highly thriving. If you are considering starting a thriving manufacturing business in Canada you should look towards setting up a tire manufacturing factory. Although it is a capital intensive business but at the same it is profitable.
Hand Tools Manufacturing
If you are technically inclined, one of the manufacturing businesses that you should consider starting is hand tools manufacturing. There is a large market for tools like hammer, tin cutters, pliers, screwdrivers, scissors, puncher, chisels, hand saw, string trimmer, edging shears, turfing iron, half – moon cutter, besom et al.
Although a diversified product selection usually shelters the industry from macroeconomic fluctuations, the industry is largely homogeneous and its low-cost nature renders manufacturers vulnerable to pressure from lower priced and more complex substitutes such as power tools.
As a result, imported products manufactured in countries with lower labour costs have increasingly flooded the Canadian market, though the depreciation of the loonie in recent years has mitigated this pattern to an extent. Just ensure that you conduct a thorough market survey and feasibility studies before launching the business. It is indeed a profitable business venture.
Mobile Phone Accessories Manufacturing
The market for smartphones is on the increase daily and as such there are corresponding increase in the demand for phones accessories. There is a large market for mobile phone accessories like earphones, Bluetooth device, casing, batteries, battery chargers and power banks et al.
If you live in Canada and even in any part of the world, one of the businesses that you should consider starting is mobile phone accessories production business. It is a highly profitable business and there is a global market for its products.
Automobile Spare Parts Manufacturing
Automobiles are subjected to wear and tear hence the need for occasional replacement of worn-out parts. If you have the financial capacity and good business skills, then you should consider starting your own automobile spare parts manufacturing business in Canada. It is not a must that you should produce all the parts of a car, you can choose to specialize only in the manufacturing of brake pads for different vehicle brands and models and you will enjoy a huge patronage.
The bottom line is to conduct a thorough market survey and feasibility studies; it will help you identify the parts in a vehicle that usually wears out and is in high demand in the market. That will guide you to choose the spare parts to specialize in.
Boiler & Heat Exchanger Manufacturing
This industry manufactures boilers and heat exchangers. In addition to their manufacturing activities, companies also provide installation services for their products. These products include boilers, which are closed vessels where fluid is heated; heat exchangers, which enables thermal energy to be transferred between fluids while keeping them separate; and radiators, which are simpler forms of heat exchangers.
As consumers increasingly demand efficient sources of energy, opportunities for growth should be available to industry operators, but may be tempered by other factors. Industry products will likely experience growing competition from renewable energy alternatives such as geothermal heating, solar heating and renewable natural gases as governments and consumers continue to increase clean emission standards.
Electrical Equipment Manufacturing
The Electrical Equipment Manufacturing industry in Canada manufactures power, distribution and specialty transformers; electric motors, generators and motor-generator sets; switchgear and switchboard apparatus; relays and industrial controls.
Electrical equipment manufacturers distribute their products to other manufacturing industries, wholesalers and the construction industry. This indeed a thriving industry. However, it must be noted that the industry is currently low as a result of COVID-19 pandemic
Baking Mix and Prepared Food Manufacturing
The Baking Mix and Prepared Food Manufacturing industry manufactures prepared foods such as sandwiches, prepared meals and peeled or cut vegetables. Companies in the industry also use dried and dehydrated ingredients to manufacture dessert mixes, flavoring powders and processed eggs.
The Baking Mix and Prepared Food Manufacturing industry in Canada is expected to grow moderately over the five years to 2020. An improving economy and rising per capita disposable income levels during most of the period resulted in increased domestic demand for a wider variety of higher-quality, more nutritious and more diverse food products.
Touch Light Manufacturing
Another cool business that you can consider starting if you want to go into a thriving manufacturing business in Canada is a touch light manufacturing factory. Touch lights comes in different shapes and sizes and they are useful in our homes and offices.
Security men and women are the largest consumers of touch lights. This goes to show that there is a good market for touch light. Just ensure that you are involved in the production of both rechargeable and battery enable touch lights.
Umbrella, Raincoats and Rain boot Manufacturing
When it rains, people usually make use of umbrellas, raincoats and rain booths and it is a fact that spring (raining season) is constant; it comes yearly. Aside from rains, people also make use of umbrella to protect themselves against the scorching sun.
This goes to show that there is a large market for umbrella, raincoats and rain boots. So, if you are considering starting a business in the manufacturing sector in Canada, you should consider going into the production of umbrellas, raincoats, and rain boots. It is indeed a profitable business despite the fact it is seasonal.
Footwear and Belt Manufacturing
Shoes and belts all have a huge market in Canada and overseas. You can choose to go into the mass production of footwear and you will attract customers from within the country and abroad. Male shoes, female shoes and also children’s shoes can be produced with either rubber, leather or synthetic leather. Just ensure that you conduct a proper market survey and feasibility studies before choosing a niche.
Manufacturing of Metal Cans and Container
The Metal Can and Container Manufacturing industry in Canada manufactures light metal cans made of aluminum or steel that are used as beverage and food containers. It also manufactures light metal shipping containers including barrels, drums and pails. The Metal Can and Container Manufacturing industry in Canada is expected to grow over the five years to 2021, as consumer spending and the appreciation of the Canadian dollar offset each other.
Imports are expected to continue to penetrate the market and price out domestic operators. Still, industry growth is expected to be marginal due to the increasing consolidation of more cost-efficient major players. Improved export performance will also buoy the industry briefly.
Wire and Cable Manufacturing
Players in the Wire and Cable Manufacturing industry in Canada produce insulated nonferrous wire and fiber-optic cable products that are essential to the electronics manufacturing, utilities, telecommunications and construction markets.
Interestingly, the industry has endured rising import competition over the five years to 2020, presenting a major obstacle for growth. Imports’ share of domestic demand for wire and cable is anticipated to reach 47.3 percent in 2021, up from 45.1 percent in 2015.
In addition, global copper and aluminum prices have experienced volatile declines during the reporting period. Industry operators must generally pass along purchase cost savings to customers, which means falling metal prices reduce revenue.
Electronic Component Manufacturing
The Electronic Component Manufacturing industry in Canada produces a range of input devices that are necessary in the production of electronics, including circuits and memory chips Integrated circuits, semiconductor devices and parts, bare printed circuit boards, printed circuit assemblies, electric connectors and inductors and all other electronic components.
Between 2015 and 2019, the industry expanded despite continued offshoring and greater competition from US and East Asian manufacturers, which offer lower-priced products due to more competitive labour costs. The primary catalyst for industry expansion has been robust demand for industry products both domestically and abroad and a global shortage of electronic components, which increased prices on certain products.
Manufacturing of Wristwatches and Wall Clocks
Although there are well – known brands in the wristwatch and wall clock manufacturing business, but that does not mean that you will not attract your own market if you start this business in Canada.
As a matter of fact, the average person that goes to the market to purchase a clock does not really care about the brand name as long as the product is good and affordable. So, if you are looking for a business to start in the manufacturing industry in Canada, you should consider opening a factory for the production of wristwatches and wall clocks.
If you are looking for a business to start in the manufacturing industry in Canada, you should consider going into the production of soap and cleaning compound; there is a large market for this type of business. The Soap and Cleaning Compound Manufacturing industry in Canada has contracted over the five years to 2021 despite several conflicting revenue trends, in light of increased import competition from foreign manufacturers and significant volatility regarding crude oil prices.
The good news is that soap and cleaning compound manufacturing companies have benefited from growth in the Canadian population, which has increased demand for industry products from households, in addition to the COVID-19 pandemic, which increased demand for soap and cleaning compounds both domestically and abroad.
Picture Frame Manufacturing
Another simple yet thriving business you can start in the manufacturing industry in Canada is picture frame production. There is a large market for picture frames in Canada. You can go into the production of different shapes and sizes of photo frames; it is indeed a profitable business that requires low startup capital.
The competition in the industry is moderate and there is no monopoly in the industry; every photo frame manufacturer can favorably compete in the industry as long as they produce quality frames with good designs.
Eye Glasses and Frames Manufacturing
Eye glasses and frames manufacturing is another thriving manufacturing business that an entrepreneur can start in Canada if he or she is considering going into the manufacturing industry. Although brand names sell in this industry, but if you are determined and creative, you will be able to carve a niche for your company in this industry. Starting an eye glasses and frames manufacturing business is expensive but it is indeed a profitable business because there is a large market for the products.
Mattress and Pillow Manufacturing
If you are considering starting a thriving business in the manufacturing industry in Canada, it is important to first conduct your market survey and feasibility studies before choosing a product to start manufacturing. One of the products you can start manufacturing is mattresses and pillows. There is hardly any home in Canada that you will not find at least a mattress and pillow.
That goes to show that there is a very large market for pillows and mattresses. No matter the industry that you are in and the competition in the industry, if your products are of good quality and you have a good marketing and sales strategy, you can favorably compete in the industry.
Safety Gadgets Production
Safety gadgets production is another thriving business that an entrepreneur can consider starting in Canada. There is a large market for safety gadgets such as helmets, overalls, protective goggles, safety boots, safety vest (bib) et al. If you are considering starting this type of business, then you must be willing to work with the standard and specifications of the regulatory bodies in the industry.
It is a capital-intensive industry and at the same time it is a profitable venture to go into. But it is advisable to conduct a thorough market survey and feasibility studies before starting this type of business; it will help you to identify your own market.
Ceramic Wares Production
Washing hand basins, and water closets are essentials in building facilities. A building is not complete if there are not toilets hence the high demand for WCs and other ceramic wares. If you are considering starting a thriving manufacturing business in Canada, you should look towards starting a ceramic wares production factory. It is indeed a thriving and highly profitable business.
Diapers and Baby Wipes Production
Diapers and baby wipes are essential commodities for parents; these are the stuffs used for babies and children between the ages of 0 months and 2 ½ years. Parents with kids that fall within the stated age brackets don’t have any option other than to purchase diapers and baby wipes.
If you are considering starting a thriving and profitable manufacturing business in Canada, starting a diaper and baby wipes production line won’t be a bad idea. Although there are major players in the business, but one thing is certain, if your products are of good quality and affordable, you will sure attract your own market.
Of course, no building is complete without doors; doors are essential component of a building. If you are looking towards starting your own manufacturing company in Canada and you have not made up your mind on the product to produce, then you should consider going into doors manufacturing. Much more than manufacturing regular doors, you can also specialize in the production of security doors. There is a huge market for security doors and the business is indeed profitable in Canada.
Aluminum Products Manufacturing
There are several products that can be made from aluminum such as windows, doors, roofs, pans, et al. If you are looking for a thriving manufacturing business to start in Canada, you can consider going into aluminum products manufacturing. It is a highly thriving and profitable business.
Before starting this type of business, it is advisable to conduct a thorough market survey and feasibility studies so as to identify aluminum products that are highly sellable; it will make marketing easier for your team. You can as well produce plain aluminum sheets, there is a large market for it.
Furniture is another essential property that are needed in offices, homes, schools and virtually in any building facility. Chairs, tables, cupboards, beds, cabins, shelves, wardrobes, et al are highly marketable. If you are looking towards starting a thriving manufacturing business in Canada whose products cuts across both the rich and the poor, then you should consider starting a furniture manufacturing business.
It is indeed a profitable business and if your furniture are good and of high quality, and you are able to promote your brand, you will be able to attract customers not only where you are located both in the international market.
Another profitable and highly thriving manufacturing business that you should consider starting in Canada is opening a textile production factory. There is a very large global market for textiles. Just like most manufacturing businesses, setting up a textile manufacturing company is capital intensive. If you are considering starting this type of business, you should be able to come up with a workable business plan; with a good business plan, you will be able to comfortably penetrate the market.
Manufacturing of paint is yet another thriving manufacturing business that can be started in Canada. Operators in the Paint Manufacturing industry in Canada produce various paints, timber finishes and other surface coating products to decorate and protect surfaces against wear, weather and corrosion. Key products include paints, varnishes, lacquers, stains, wood fillers, paint thinners and removers and they are in high demand.
Paints manufacturing business is a relatively capital intensive business, but if you are able to do conduct market survey and feasibility studies before investing in this type of business, you will be able to make good business decisions that will help you breakeven within record time.
Jewelry production is yet another thriving manufacturing business that an entrepreneur who wants to go into manufacturing Canada can start. There are rooms to start this type of business on a small scale, medium scale or large scale. You can as well choose the kind of jewelry you want to manufacture.
The fact remains that there is a large market for jewelry because women never get tired of purchasing jewelries made from different materials. Please note that if you want to start a jewelry production company, it is not a must that you just manufacture jewelries made from pure gold or silver; you can produce jewelry from plastic, copper wire, gold plating et al.
Air Freshener Production
Air freshener is yet another product that can be mass-produced. If you are considering starting a low budget yet thriving manufacturing business in Canada, then you can start air freshener production. With little startup capital, you can successfully setup your company in Canada.
Air freshener can be produced either in liquid, gaseous or solid forms. If you want to stay competitive in this industry, you must ensure that you come up with unique and pleasant smells and also your products must be well – packaged.
Another thriving manufacturing business that an entrepreneur can start in Canada is the manufacturing of pesticides. Operators in the Pesticide Manufacturing industry in Canada manufacture household and agricultural pest control chemicals. Industry products include agricultural chemical products such as herbicides, insecticides, fungicides, insect repellents, sheep dips, fly sprays and flea powders.
It is a thriving business especially around rural and farming communities. So, if you are looking for a thriving manufacturing business to start in Canada; a business that requires moderate startup capital but profitable, then you should consider going into the production of pesticides.
As small as buttons are, one can become a millionaire by only producing buttons in different shapes, sizes, colors and designs. There is a large market for buttons because most clothes that you find in the market have buttons. So, if you are considering starting a thriving business in Canada, then you should consider setting up a button production company.
Part of what you need to do to grow this type of business is to network with companies that make clothes; they are your major market. Just ensure that you conduct a thorough market survey and feasibility studies so that you won’t start this type of business on a trial and error method.
Manufacturing of Blinds and Shades
Lastly, another thriving manufacturing business that investors should consider starting in Canada is the manufacturing of blinds and shades. Operators in the industry fabricate window coverings, including Venetian and other window blinds; shades; curtain and drapery rods and poles; and other related fixtures.
After production, window furnishings are distributed to wholesalers, retailers, and contract outfitters. From there, they are sold to residential, commercial, and institutional sectors. If you are considering starting this type of business, you should be able to come up with a workable business plan; with a good business plan, you will be able to comfortably penetrate the market.
- How to Start a Dog Treat Business in Canada - February 15, 2021
- Writing an Immigration Consultant Marketing Plan [Sample Template] - February 15, 2021
- 50 Amazing Business ideas You Can Start With $100K in Canada - February 11, 2021