Do you want to know what machines are needed to start a water purification plant? If YES, here are 12 important water purification equipment and their cost.

Water pollution, according to experts, is caused by so many things including agricultural run-off, domestic sewage, and industrial effluents. But the growing nature of the water purification industry has made amends and has created a system that provides clean and adequate water for human use and consumption.

The growth in this industry is mainly attributed to the rapidly growing population and urbanization, increasing demand for new water resources, growing concerns of water quality and public health, and increasing prevalence of water-borne diseases.

Here are water purification equipment and machines available in the industry for the provision of clean water for use in domestic and industrial establishments.

12 Water Purification Equipment and Machines and Their Cost

  1. BOEEP Sludge Dehydrator Machine

This machine that leverages the screw extrusion principle is a new type of solid-liquid separation device. It reaches the goal of extrusion dewatering sludge by the powerful extrusion pressure of changing the screw diameter and distance along with the tiny spacing between moveable and fixed annular plates.

Cost: $2,950 – $20,000

  1. FILOX

These water filters are specially designed to help reduce unwanted levels of iron, hydrogen sulphide and manganese that are found in well water. Note that with a high percentage of manganese in these filters, they are considered the best water filters for removing iron and manganese from well water.

Cost: $3,368 – $9,868

  1. Acid Water Filters

Once the pH of standard water dips below seven, it becomes acidic. This can cause damage to plumbing fixtures and can even cause staining on bathtubs. Generally, acid water is not considered unsafe, just unbalanced with its pH levels. An acid water filter uses a unique filtering method to balance the pH level in water and to normalize it.

Cost: $1,450 – $6,711

  1. CGF Series Bottle Water Filling Machine

This water filling machine is used to fill mineral water or purified water into PET bottle from 200ml-2000ml. Different models can satisfy various requirement of output from 2000B/H to 36000B/H. The whole process is automatic, suitable for PET bottle, plastic bottle filling, mineral water, and pure water.

By using the gravity or micro pressure filling, this machine makes the speed faster and more stable. The machine adopts advanced Mitsubishi programmable controller (PLC) to control the machine, interworking with inverter, and running more stable and reliable. T

Cost: $14, 450

  1. Carbon Filters

The purpose of carbon filters is to remove all impurities, particularly toxins, chemicals and heavy metals found in water. A carbon water filter is designed to remove more than 100 of the 129 toxins that the EPA says is found in standard tap drinking water. The filter also balances the taste and eliminates any odours from the water.

Cost: $2,311 – $4,290

  1. Sediment Filter

A sediment filter is used to remove sediment build up that is commonly found in drinking water. It uses a media bed that can vary in size, designed to allow the water to pass through it while the sediment elements are left behind. Most sediment filters require nominal maintenance and have self-cleaning cycles. They are considered to be one of the easiest of all filters for homeowners use.

Cost: $ 3,300-4,000/ Set

  1. Ultraviolet Light

An ultraviolet light filter (also called a UV filter) uses the power of UV light to sanitize water. It works by using a chamber, most often made from stainless steel, and relies upon light waves that destroy pathogens and harmful bacterium. This method is favoured because no chemicals are required, just light.

Cost: $5,860/Piece

  1. Chlorinator

A chlorinator is used to kill bacteria and pathogens in water when all other efforts will not suffice. This machine introduces small amounts of the chemical into the water to cleanse it from any pathogens. A carbon filter is often piggybacked with this filter to remove the chlorine after the chlorinator has treated the water.

Cost: $3,650- $3,850

  1. Conditioning Filter

The aim of a conditioning filter is to soften the water as it passes into faucets. These filters are used especially for hard water. Hard water consists of water that has minerals in it that can cause damage to pipes and faucets. A conditioning filter removes these elements and flushes them out. The unit back washes built-up impurities every couple of days.

Cost: $ 2,000

  1. Reverse Osmosis Water Treatment Machine

Leveraging a special process that involves forcing water through membranes, reverse osmosis helps to cleanse impurities from water. As the water passes through the membrane, it is filtered and only clean water comes out the other side. The process is forced, and continued, so that dirty water is always being forced through the membrane.

Cost: $8,800- $15,000/set

  1. Iron Filters

Iron filters are used to eradicate elements of iron from water. This is done using a media bed called greensand. The greensand uses potassium permanganate to filter the iron from the water as it passes through. Every few days, the system will backwash the media bed and reset to continue purifying the water.

Cost: $2,950 – $20,000

  1. No-Salt Hardness Filters

Note that the hardness in water is typically caused by the presence of magnesium and calcium. No-salt hardness filters are designed to filter these minerals and dissolve them. Once they do dissolve, they become clear and microscopic. This prevents the build up of minerals in the piping system, and results in cleaner drinking water.

  • Cost: $ 2,000 – $3,400

A variety of water purification equipment and machines exist that offer unique benefits to those who use them. When considering what water purification equipment you can use, it’s always good advice to learn more about your options. You might find out that you like the benefits one equipment type has to offer over the other.

Solomon. O'Chucks